ARMY TM 5-5420-212-23
MARINE CORPS TM 08676A-2312
2-45. POST TENSIONING ASSEMBLY, SLIDING BLOCK BEARING STRIP
This task covers:
a.
INSERT FUNCTION
b.
INSERT FUNCTION
d.
INSERT FUNCTION
INITIAL SETUP:
Tools Required
Tool Kit, General Mechanic's, Automotive (GMTK) (1, Appendix B, Section III)
Equipment Conditions
Sliding block removed from post tensioning assembly frame (para. 2-42) and placed on raised, flat surface.
a.
Inspection
(1) Inspect nylon bearing strips (4) for gouging and wear.
(2) If this is evident, replace with new strips on both sides of sliding block.
b.
Removal
(1) Unscrew and remove the eight stiffnuts (1), washers (2) and screws (3) securing bearing strips (4) to sliding block
(5).
2-118