Hazards of Electromagnetic Radiation to Ordinance (HERO)

efforts to disrupt the enemy’s electiveness, and to allow your actions to go unnoticed. To accomplish these objectives, EMCON conditions are designed with the following guidelines: Minimize detection by enemy sensors Allow effective friendly command and control (C2) Support operations security (OPSEC) Support operational deception (OPDEC) Minimize interference among friendly systems Degrade effectiveness of enemy C2 NOTIFICATION All ships need to keep command and control informed of any actions that may restrict, change, or alter in any way communication functions. The most fundamental of these actions follow: If at all possible, ships should notify the shore station of scheduled periods of EMCON due to radiation restrictions (HERO, HERF, RADHAZ) or other events (man aloft, aircraft operations, etc.) prior to the actual restrictive period. If EMCON is imposed without notice, relay procedures to deliver outgoing traffic may be attempted. Shore stations must be alert to the sudden, unscheduled imposition of EMCON and the accompanying lack of any transmission from the ship. Guidance for each EMCON condition must be posted at each station or space with responsibility for setting or monitoring a given EMCON condition for the emitters. If the ship should enter EMCON without prior notice, the shore station will keep a listening monitor on the ship’s frequencies until the ship returns to the air. Additionally, a listening watch will be kept on the HICOM (covered and uncovered) net for possible contact from the ship. Once a ship with a multichannel (VFCT) termination has returned to the air on previously assigned frequencies, the orderwire will be restored before the traffic circuits. If the ship 3-2 maintains a single channel (FSK) termination, the circuit will be reestablished via the technical control center. AUTHORITY TO IMPOSE EMCON EMCON is imposed as directed by the task group, squadron, or local instructions and standard operations procedures. HAZARDS OF ELECTROMAGNETIC RADIATION TO ORDNANCE (HERO) A danger of RF radiation is the risk of premature firing of ordnance or explosion of their warheads during loading and offloading operations. The hazard to electronic explosive devices (EEDs) occurs because of the heat generated by a current passing through the sensitive wires surrounding a temperature-sensitive explosive. If energy is dissipated into the wires, current will flow, the explosive will become hot, and an explosion can result. CRITERIA When ordnance or their warheads are loaded, unloaded, or transferred, shipboard HERO conditions may sometimes prohibit the transmission of RF frequency energy below 30 MHz. To maintain communication when HERO conditions are in effect, you will be required to use other frequencies or communication methods. ACTUATION Transmitters and their antennas have only one purpose, which is to radiate electromagnetic energy. The initiating elements of ordnance items need only to be supplied with the proper amount of energy for an explosion to take place. RF energy may enter a weapon through a hole or crack in the skin of the weapon. RF energy may also be conducted into the weapon by the firing leads or other wires that penetrate the weapon enclosure. The probability of unintentional EED actuation is not totally predictable since detonation depends upon such variables as frequency, field strength, and environment. In general, ordnance systems that have proven to be susceptible to RF energy are most susceptible during loading, unloading, and handling in RF electromagnetic fields.