Section III. DISASSEMBLY AND REASSEMBLY

TM 11-6130-385-34

Section III. DISASSEMBLY AND REASSEMBLY

( 9 ) Remove power transformer (T1).

3-20. Disassembly and Reassembly Procedures

b. Reassembly. Te reassembly sequence is the

a. Disassembly. For rapid and efficient access to

r e v e r s e of disassembly (a a b o v e ) .

v a r i o u s modules, proceed as follows:

(1)

Remove the two covers.

3-21. Parts Location

(2)

Remove filter (A5).

Refer to figures 3-1 through 3-9 for parts location

(3)

Remove power switch boards

(A7)

and

a n d identity. Refer to figure 3-1 (2 sheets) for ex-

hookup

wiring.

ploded view of unit and attaching parts.

(4)

Remove wiring harness (W1).

D i s a s s e m b l e the static inverter in the sequence of

(5) Remove PCB deck (A2 through A4).

index numbers which follow and as shown on figure

(6) Remove capacitor assembly (A6).

( 7 ) Remove wire assemblies (W2 and W3).

( 8 ) Remove fan bulkhead assembly (A9).

3-17