Fabrication Instructions

(4) Fig. column. This column lists the number of the figure where the item is identified/located in section II and section III. (5) Item column. The item number is that number assigned to the item as it appears in the figure referenced in the adjacent figure number column. 5. Special Information. a. Usable on Code. The Usable on Code appears in the lower left corner of the DESCRIPTION column heading. Usable on Codes are shown as UOC: . . . . . . . in the DESCRIPTION column (justified left) on the first line of applicable item description/nomenclature. Uncoded items are applicable to all models and title description will indicate all 6.2 and 6.5 Liter engines. Identification of the Usable on Codes used in the RPSTL are: Code Used On 10E 6.2 Liter (Serial number 1-99,999) 11E 6.5 Liter (Detuned) 1998 12E 6.5 Liter (Turbo) 1998 20E 6.2 Liter (Serial number 100,000 and above) 30E 6.5 Liter 1995 30E 6.5 Liter 1996 40E 6.5 Liter (Detuned) 1996 50E 6.5 Liter (Turbo) 1996 60E 6.5 Liter 1997 70E 6.5 Liter (Detuned) 1997 80E 6.5 Liter (Turbo) 1997) 90E 6.5 Liter 1998 b. Fabrication Instructions. Bulk materials required to manufacture items are listed in the bulk material functional group of this RPSTL. Part numbers for bulk materials are also referenced in the description column of the line item entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source-coded to be manufactured or fabricated are found in TM 9-2320-280-20 and TM 9-2815-237-34. c. Assembly Instructions. Detailed assembly instructions for items source-coded to be assembled from component spare/repair parts are found in TM 9-2320-280-20 and TM 9-2320-280-34. Items that make up the assembly are listed immediately following the assembly item entry, or reference is made to an applicable figure. d. Kits. Line item entries for repair parts kits appear in LCN group kits in section II. e. Index Numbers. Items which have the word BULK in the figure column will have an index number shown in the item number column. This index number is a cross-reference between the National Stock Number/Part Number Index and the bulk material list in section II. f. Associated Publications. The publications listed below pertain to the 1-1/4 ton, 4x4, M998, M998A1, and M998A2 series vehicles and their components: TM 9-2320-280-10 Operator’s Manual TM 9-2320-280-10HR Hand Receipt, Operator’s Manual TM 9-2320-280-20 Unit Maintenance Manual TM 9-2320-280-24P Unit, Direct Support and General Support Maintenance Repair Parts and Special Tools List TM 9-2320-280-34 Direct Support and General Support Maintenance Manual TM 9-2815-237-34 Direct Support and General Support Engine Maintenance Manual DMWR 9-2815-237 Depot Maintenance Work Requirements, Engine g. Illustrations. Item numbers on illustrations have been assigned in clockwise sequence, starting at the 11 o’clock position (upper left). 5 TM 9-2815-237-34P