LAMP ASSEMBLY INSTALLATION

TM 9-2330-392-14&P 4-17. FRONT AND SIDE MARKER LIGHTS MAINTENANCE (Con’t). b. LAMP ASSEMBLY REMOVAL NOTE Tag wires for installation if marker bands are missing or illegible. 1. Remove two screws (5) securing door (4) and lens (3) to light assembly (1). 2. Remove door (4) and lens (3) from light assembly (1). 3. Remove two rivets (12) securing housing (13) to cargo body. 4. Remove housing (13) and light assembly (1) with attached lead (15) and ground wire (8) from cargo body 5. Disconnect lead (15) from wiring harness (14). 6. Remove nut (6), lockwasher (7), and capscrew (10) securing ground wire (8) to housing(13) Discard lock-washer. 7. Remove four rivets (9) securing light assembly (1) to housing (13). 8. Remove light assembly (1) and gasket (11) from housing (13). c. LAMP ASSEMBLY INSTALLATION 1. Install light assembly (1) and gasket (11) into housing (13). 2. Install four new rivets (9) securing light assembly (1) to housing (13). 3. Install capscrew (10), new lockwasher (7), and nut (6) securing ground wire (8) to light housing (13). 4. Connect lead (15) to wiring harness (14). 5. Install housing (13) into cargo body and install two new rivets (12) securing housing (13) to cargo body 6. Position lens (3) and door (4) on light assembly (1). 7. Install two screws (5) securing lens (3) and door (4) to light assembly (1). FOLLOW-ON TASKS: • Connect intervehicular cable to towing vehicle (para 2-10). • Check operation of light (TM 9-2320-280-10). 4-26