|
| |
Back
UNIT MAINTENANCE INSTRUCTIONS - Continued | Up
TM-9-2330-392-14P Tracked Trailer Cargo Manual | Next
PRELIMINARY SERVICING AND ADJUSTMENT |
TM 9-2330-392-14&P
Section I. REPAIR PARTS; TOOLS; SPECIAL TOOLS; TEST,
MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE);
AND SUPPORT EQUIPMENT
4-1.
COMMON TOOLS AND EQUIPMENT.
For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE)
applicable to your unit.
4-2.
SPECIAL
TOOLS;
TEST,
MEASUREMENT,
AND
DIAGNOSTIC
EQUIPMENT
(TMDE);
AND
SUPPORTEQUIPMENT.
No special tools, TMDE, or support equipment is required to maintain the trailers.
4-3.
REPAIR PARTS.
Repair parts are listed and illustrated in Appendix F of this manual.
Section II. SERVICE UPON RECEIPT
4-4.
GENERAL.
When a new, used, or reconditioned trailer is first received, determine whether it has been properly prepared for service
and is in condition to perform its mission Follow the inspection instructions in paragraph 4-5 and servicing instructions in
paragraph 4-7.
4-5.
SERVICE UPON RECEIPT OF MATERIAL.
a.
Unpacking.
(1)
Refer to DD Form 1397 for procedures on unpacking the trailer
(2)
Remove all straps, plywood, tape, seals, and wrappings
b.
Checking Unpacked Equipment
(1)
Inspect the equipment for damage incurred during shipment If the equipment has been damaged,
report the damage on SF 364, Report of Discrepancy.
(2)
Check the equipment against the packing slip to see if shipment is complete Report all discrepancies in
accordance with the instructions in DA Pam 738-750.
c.
Processing Unpacked Equipment.
(1)
No tools are required to process the equipment. All supplies required to service the equipment are
listed in Appendix E.
4-3
|
