Table 2-1. Operator’s Preventive Maintenance Checks and Services for M1101, M1102, and Trailer Chassis

TM 9-2330-392-14&P 2-8 Change 2 Table 2-1. Operator’s Preventive Maintenance Checks and Services for M1101, M1102, and Trailer Chassis - Continued Item No. Interval Location Procedure Not Fully Mission Capable If: Item To Check/ Service 15 Weekly Wheel Assemblies (Right) Check lugnuts and stud nuts to make sure that they are not loose or missing. If any are loose, tighten. Three or more lugnuts or stud nuts are missing. 16 Weekly Cargo Body a. Inspect cargo body for missing rivets, missing cargo tiedowns, and damage to the box. b. Inspect tailgate for damage, missing or broken hardware, missing or broken lan- yard cable, and missing or damaged pin. Check that tailgate rotates freely on hinges. c. Inspect decontamination bracket for dam- aged or missing hardware. d. Visually check that identification plate and shipping plate are firmly attached and readable. e. Inspect bows for damage. 17 Weekly Soft Top Kit Visually inspect canvas cover for rips, tears, or missing footman loops. 18 Weekly Frame and Cross- member Inspect frame side rails for cracks, breaks, bends, wear, deterioration, and missing or loose fasteners. Cracks, bends, or breaks in frame are present. 19 Monthly Brake Actuator Assembly Inspect the master cylinder assembly for damaged or missing cap, leaks, and proper fluid level. If cap is damaged or missing, replace it. Proper fluid level is 1/8 in. (3 mm) below top edge of reservoir. If not at specified level, add fluid (App G). Any leaks are found.