|
| |
Back
27-3. BODY WIRING HARNESS REPLACEMENT (Cont’d) | Up
TM-9-2320-387-24-2 Truck Utility: Shelter Carrier 4 x 4 M113 Truck Utility: UP-Armored Carrier 4 x 4 M114 Manual | Next
27-3. BODY WIRING HARNESS REPLACEMENT (Cont’d) |
10-11. SIDE HOOD STOP REPLACEMENT
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Two locknuts
(Appendix G, Item 109)
Sealing compound
(Appendix C, Item 72.1)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
Hood raised and secured (TM 9-2320-387-10).
Maintenance Level
Unit
FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-387-10).
TM 9-2320-387-24-2
10-20
Change 1
1
2
3
4
5
6
NOTE
M1114 vehicles are equipped with plusnuts/tapping blocks instead of
nuts and washers.
Remove two locknuts (6), washers (5), capscrews (3), washers (2), and side hood stop (1) from body (4).
Discard locknuts (6).
NOTE
M1114 vehicles are equipped with plusnuts/tapping blocks instead of
nuts and washers. Apply sealing compound to threads of capscrews at
installation for M1114 vehicles only.
Install side hood stop (1) on body (4) with two washers (2), capscrews (3), washers (5), and locknuts (6).
Tighten capscrews (3) to 6 lb-ft (8 N•m).
b. Installation
a. Removal
|
