|
| |
Back
27-3. BODY WIRING HARNESS REPLACEMENT (Cont’d] | Up
TM-9-2320-387-24-2 Truck Utility: Shelter Carrier 4 x 4 M113 Truck Utility: UP-Armored Carrier 4 x 4 M114 Manual | Next
27-3. BODY WIRING HARNESS REPLACEMENT (Cont’d) |
TM 9-2320-387-24-2
10-8
Change 1
10-5. HOOD LATCH MAINTENANCE (Cont’d)
Install hood latch (11) on latch (10) with two rollers (9), pin (8), and cotter pin (1).
NOTE
• If only rubber latch is to be replaced, spring pin may not be
completely out of base.
• M1114 vehicles are equipped with plusnuts/tapping blocks
instead of nuts and washers. Apply sealing compound to
threads of capscrews for M1114 vehicles only.
1.
Install latch (10) on base (7) with spring pin (2).
2.
Install base (7) on body (5) with two washers (4), capscrews (3), washers (4), and locknuts (6).
Tighten capscrews (3) to 6 lb-ft (8 N•m).
d. Installation
c. Assembly
FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-387-10).
1
2
3
4
5
4
6
7
8
9
10
11
9
|
