27-3. BODY WIRING HARNESS REPLACEMENT (Cont’d)

TM 9-2320-387-24-2 27-3. BODY WIRING HARNESS REPLACEMENT (Cont’d) 67. Install harness (6) on body (241 with four clamps (221, capscrews (191, and locknuts (23). 68. Connect harness leads 67C (301 and 67E (29) to parking brake switch (20). 69. Connect harness leads 467C (281,457 (25),14A (11, 14B (2), and 40F (26) to shift controls housing (27). 70. Install harness (6) on body (24) with clamp (17) and two screws (181. 71. Install harness (6) and harness (10) on body (24) with clamps (7) and (91 and screws (81 and (11). 72. Connect harness leads (34) and (35) to transmission and transfer case indicator lights (33) and (32). 73. Install harness (6) on body (24) with clamp (151, capscrew (141, and locknut (16). 74. Install harness (6) on parking brake boot (21) with clamp (121, capscrew (131, and locknut (31). 75. Install harness (61 on body (24) with clamp (51, capscrew (41, and locknut (3). 76. Install harness (6) on cowl (38) with three clamps (401, capscrews (411, and locknuts (39). 77. Install harness (6) on cowl (38) with clamp (421 and locknut (43). 78. Apply lubricating oil to harness connector (36) and to brake warning lamp switch (371. 79. Connect harness connector (36) to brake warning lamp switch (37). 27-36