27-3. BODY WIRING HARNESS REPLACEMENT (Cont’d)

TM 9-2320-307-24-2 I 27-3. BODY WIRING HARNESS REPLACEMENT (Cont’d) I 36. 37. 38. Install trailer connector (1) in bracket (2) with four capscrews (8) and nut and lockwasher assemblies (7). Install harness (3) on body (6) with five clamps (51 and screws (41. apply antiseize compound to harness ground lead 95B (12) and install on buss bar (11) with lockwasher (13) and capscrew (14). 39. Apply antiseize compound to harness ground lead 95C (21) and install on left rear side marker light (19) with screw (20) and locknut (221. 40. 41. 42. Connect harness leads 21C (27),22_461B (26),23B (181, and 24B (17) to left rear composite light (10). Connect harness lead 489A (23) to left rear side marker light (191. Install harness (3) on shield (16) with two clamps (331, capscrews (151, and nut and lockwasher assemblies (28). 43. Install shield (16) on body (6) with two lo&washers (25) and screws (24). 44. Install harness (3) on body (6) with clamp (291, capscrew (301, and nut and lockwasher assembly (31). 45. Install harness (31 on body (61 with two clamps (9) and screws (32). 46. Install harness (31 on body (6) with six clamps (37) and screws (38). 47. Connect harness leads 28A (36) and 58C (35) to fuel tank jumper harness leads (34). 27-28