|
| |
Back
10-8. HOOD PROP ROD AND BRACKET MAINTENANCE | Up
TM-9-2320-387-24-2 Truck Utility: Shelter Carrier 4 x 4 M113 Truck Utility: UP-Armored Carrier 4 x 4 M114 Manual | Next
e. Installation |
TM 9-2320-387-24-2
27-3.
BODY WIRING HARNESS REPIACEMENT (Cont’d)
1
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
Connect harness connector (5) to protective control box (3).
Connect harness connector (7) to turn signal flasher module (6).
Connect harness connector (12) to turn signal control (11).
Connect harness leads 75A (13), 75B (15), and 810A/810B (14) to stoplight switch leads (16).
Connect harness leads 57D (18) and 71C (17) to windshield washer motor leads 57 (1) and 71(2).
Install harness (4) on steering column support (10) with clamp (9) and screw (8).
Connect harness leads 17A (25),18A (26), and 16A (21) to dimmer switch (24).
Install shield (23) on dimmer switch (24) with three screw-assembled washers (22).
Install harness (4) on body (29) with three clamps (191, capscrews (201, washers (271, and locknuts (28).
Connect harness leads 27C (34),27D (37),27K (38), and 7l.A (39) to two circuit breakers (40).
Connect harness lead 25A (30) to horn switch (42).
Apply antiseize compound to harness ground lead 57C (32) and install on steering column (41) with
capscrew (31) and locknut (33).
21.
Install harness (4) on steering column support (10) with two clamps (35) and screws (36).
27-24
|
