|
| |
Back
28-13. TURBINE SHAFT AND OVERDRIVE CARRIER ASSEMBLY REPAIR (Cont’d) | Up
TM-9-2320-387-24-2 Truck Utility: Shelter Carrier 4 x 4 M113 Truck Utility: UP-Armored Carrier 4 x 4 M114 Manual | Next
j. Overdrive Unit Assembly |
TM 9-2320-387-24-2
1 O-49.
CARGO BULKHEAD REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Materials/Parts
Ml113
Four lockwashers (Appendix G, Item 220)
Tools
General mechanic’s
tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-387-24P
Maintenance
Level
Unit
I.
Remove two capscrews (71, lockwashers (81, washers (91, and cargo bulkhead bracket (10) from
cargo floor (11). Discard lockwashers (8).
2.
Remove two nuts (11, lockwashers (2), washers (31, capscrews (51, and washers (3) from cargo
bulkhead (6) and B-pillar (4). Discard lockwashers (2).
3.
Remove cargo bulkhead (6) from vehicle.
4.
Inspect antinoise pads (121. Replace if damaged.
-1
1.
Install cargo bulkhead (6) on cargo floor (11).
2.
Install cargo bulkhead (6) on B-pillar (4) with two washers (3), capscrews (5), washers (31,
lockwashers (2), and nuts (1).
3.
Install cargo bulkhead bracket (10) on cargo floor (111 with two washers (91, lockwashers (8), and
capscrews (7). Tighten capscrews (7) to 65 lb-R (88 Nom).
4.
Tighten nuts (1) to 15 lb-R (20 Nom).
1 O-83
|
