|
| |
Back
HARNESS ASSEMBLY REPLACEMENT (Cont’d) | Up
TM-9-2320-362-14P Truck Tractor M1070 8 x 8 Heavy Equipment Transporter (HET) Manual | Next
SAFETY LANYARD REPLACEMENT (Cont’d) |
TM 9-2320-362-14&P
3-21. SAFETY LANYARD REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Materials/Parts
General mechanic’s tool kit:
One locknut P/N MS21044C3
automotive (Item 1, Section III,
Manual Reference
Appendix B)
TM 9-2320-280-10
1.
Unlatch two flexible latches (10) from keepers (8) on engine
access cover holddown brackets (7).
2.
Unlatch two engine access cover holddown latches (9) from engine
access cover holddown strikes (12).
3.
Turn two ring studs (6) and pull engine access cover (4) out
until end of safety lanyard (1) is reached.
4.
Disconnect cable assembly W66 (11) from connector (3) on tach/
hourmeter box (5).
5.
Unhook safety lanyard (1) from safety tab (13).
6.
Remove locknut (2) and safety lanyard (1) from engine access
cover (4).
Discard locknut (2).
1.
Install safety lanyard (1) to engine access cover (4) and secure with
locknut (2).
2.
Hook safety lanyard (1) onto safety tab (13).
3.
Connect cable assembly W66 (11) to connector (3) on tach/hourmeter
box (5).
4.
Install engine access cover (4) and secure with two ring studs (6).
5.
Secure two engine access cover holddown latches (9) to engine access
cover holddown strikes (12).
6.
Secure two flexible latches (10) to keepers (8) on engine access
cover holddown brackets (7).
3-40
|
