GENERAL INSPECTION AND SERVICING INSTRUCTIONS

3-7. 3-8. TM 9-2320-362-14&P 3-6. GENERAL INSPECTION AND SERVICING INSTRUCTIONS a. See Chapter 2 of this manual when checking equipment for proper operation. b. For all services and inspections, follow operator PMCS procedures given in Chapter 2 of this manual. Section IV. UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) The best way to maintain the components of the EES kit covered by this manual is to inspect them on a regular basis so minor faults can be dis- covered and corrected before they result in serious damage, failure, or injury. This section contains systematic instructions for inspection and correction of the EES kit components to avoid costly repairs or major breakdowns. This is Preventive Maintenance Checks and Services (PMCS). a. Unit maintenance, assisted by operator/crew, will perform checks and services contained in table 3-1 at the following intervals: (1) Semiannually (S). Every 6 months or 3,000 miles (4,827 km), whichever comes first. (2) Annually (A). Every 12 months or 6,000 miles (9,654 km), whichever comes first. (3) Biennially (B). Every 24 months or 12,000 miles (19,308 km), whichever comes first. b. Perform all (S) inspections in addition to (A) inspections at the time of the annual inspection. Perform all (A) and (S) inspections in addition to (B) inspections at the time of the biennial inspection. 3-9. REPORTING REPAIRS All shortcomings of the components of the EES kit will be reported on DA Form 2404 (DA Pam 738-750), Equipment Inspection and Maintenance Worksheet, immediately after the PMCS, and before taking corrective action. All deficiencies of the components of the EES kit will be reported in the equipment record. 3-2