REAR ANTENNA CABLES REPLACEMENT (Cont’d)

TM 9-2320-280-20-3 12-140. REAR ANTENNA CABLES REPLACEMENT (Cont’d) NOTE Perform steps 9 through 12 for M966, M966A1, M1025, M1025A1, M1025A2, M1026, M1026A1, M1043, M1043A1, M1043A2, M1044, M1044A1, M1045, M1045A1, M1045A2, M1046, and M1046A1 9. 10. 11. 12. 13. 14. 15. 16. models only. Connect two antenna cables (4) to antenna base (1). Install grommet (5) and retainer (7) on antenna cables (4). Install two antenna cables (4), grommet (5), and retainer (7) on wheelhouse (6) with two capscrews (2) and nut and lockwasher assemblies (3). Install two antenna cables (4) on wheelhouse (6) with two clamps (9), screws (10), and locknuts (8). Install two antenna cables (4) on underbody (12) with clamp (11) and screw (23). Position clamp (20) over yellow locator tape (22) on two antenna cables (4) and install on underbody (12) with screw (21). Secure two antenna cables (4) to underbody (12) with three clamps (16) and screws (15). Install clamp (17) on filler spout (19) and underbody (12) with washer (13), capscrew (18), washer (13), and locknut (14). 12-218