LEFT INNER COWL INSULATION PANEL REPLACEMENT

TM 9-2320-280-20-3 10-31. LEFT INNER COWL INSULATION PANEL REPLACEMENT This task covers: a Removal b. Installation INITIAL SETUP: Tools Personnel Required General mechanic’s tool kit: One mechanic automotive (Appendix B, Item 1) One assistant Materials/Parts Manual References Cotter pin (Appendix G, Item 17) TM 9-2320-280-10 Four locknuts (Appendix G, Item 58) TM 9-2320-280-24P Three nut and lockwasher assemblies (Appendix G, Item 144) Equipment Condition O-ring seal (Appendix G, Item 162) Hood raised and secured (TM 9-2320-280-10). 1. Remove four locknuts (5), washers (3), capscrews (2), and washers (3) from harness clamp (4), brake harness (8), retainer (1), and cowl (7). Discard locknuts (5). 2. Remove nut and lockwasher assembly (10), capscrew (12), and harness clamp (9) from body harness (11), brake harness (8), and cowl (7). Discard nut and lockwasher assembly (10). 3. Remove nut and lockwasher assembly (15) and capscrew (13) from harness clamp (14) and cowl (7) and disconnect body harness (11) from cowl (7). Discard nut and lockwasher assembly (15). 4. Remove upper insulation panel (6) by sliding up and out from between retainer (1) and cowl (7). 5. Remove nut and lockwasher assembly (19) and capscrew (17) from clamp (18) and cowl (7). Discard nut and lockwasher (19). 6. Remove lower insulation panel (16) by sliding down between retainer (1) and cowl (7). 10-52