|
| |
Back
WINDSHIELD GLASS AND WEATHERSTRIP REPLACEMENT fig. | Up
TM-9-2320-280-20-3 Truck Utility Cargo/Troop 1-1/4 Ton 4x4 Manual | Next
WINDSHIELD BALLISTIC GLASS REPLACEMENT FIG. |
TM 9-2320-280-20-3
10-22. WINDSHIELD BALLISTIC GLASS REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
All except M998, M998A1, M1035, M1035A1,
M1035A2, M1037, M1038, M1038A1, M1042
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Sealing compound (Appendix C, Item 47)
Manual References
TM 9-2320-280-24P
Personnel Required
One mechanic
One assistant
Equipment Condition
Windshield wiper blade and arm removed
(para. 10-70).
General Safety Instructions
Eyeshields and gloves are required when installing
and removing windshield glass.
Use eyeshields and gloves when removing and installing windshield
glass. Glass could shatter causing injury.
1. Remove six screws (6) and upper retainer (5) from windshield frame (4).
2. Remove four screws (1) and center retainer (2) from windshield frame (4).
3. Remove ballistic glass (3) from windshield frame (4).
4. Clean sealing compound from windshield frame (4).
1. Apply a 1/8 in. (3 mm) bead of sealing compound around windshield frame (4).
2. Position ballistic glass (3) to windshield frame (4) with marking on weatherstrip facing inward.
3. Install center retainer (2) on windshield frame (4) with four screws (1).
4. Install upper retainer (5) on windshield frame (4) with six screws (6).
10-40
|
