|
| |
Back
BODY MAINTENANCE TASK SUMMARY (Cont’d) | Up
TM-9-2320-280-20-3 Truck Utility Cargo/Troop 1-1/4 Ton 4x4 Manual | Next
HOOD LATCH AND BRACKET REPLACEMENT |
TM 9-2320-280-20-3
10-2. FUEL FILLER HOUSING REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Manual Reference
General mechanic’s tool kit
TM 9-2320-280-24P
automotive (Appendix B, Item 1)
1. Remove filler cap “T” handle (1) and filler cap (2) from filler spout (6).
2. Remove three nuts (7), washers (4), capscrews (3), and washers (4) from filler housing (5) and filler spout (6).
3. Remove six screws (11) and washers (10) from fuel filler housing (5) and right outer wheelhouse panel (8).
4. Push filler cap (2) through filler housing (5) and remove filler housing (5).
5. Inspect speed nuts (9) for presence or damage. Replace if defective or missing.
1. Pull filler cap (2) through filler housing (5) and install housing (5) on right outer wheelhouse panel (8).
2. Secure filler housing (5) to right outer wheelhouse panel (8) with six washers (10) and screw (11).
Tighten screws (11) to 20 lb-in. (2 N.m).
3. Secure filler housing (5) to filler spout (6) with three washers (4), capscrews (3), washers (4), and nuts (7).
4. Install filler cap (2) on filler spout (6) with “T” bade (1).
10-3
|
