|
| |
Back
FOLDING STEP | Up
TM-10-5411-231-13P Cargo Be Cover (CBC) HMMWV Type I Manual | Next
24-INCH LADDER |
TM 10-5411-231-13&P
CARGO BED COVER (CBC) HMMWV, TYPE I
0019 00
CHEST HANDLE
THIS WORK PACKAGE COVERS:
Remove, Replace
INITIAL SETUP:
Maintenance Level
Materials/Parts
Unit
Screws 10-24, .88 lg;
Tools and Special Tools
Washers, Flat No. 10;
Screwdriver, Philips #2
Washers, Lock No. 10;
Wrench, 3/8” Socket
Nuts 10-24; Chest Handle
P/N 700272
GENERAL
This procedure contains information and instructions to keep CBC chest handle assemblies in good
working order by removing and replacing damaged parts.
REMOVAL
1. Using screwdriver and wrench (see WP 0023 00, Table 0023 00-2, Item 1), remove five screws, nuts
and washers (1) holding the chest handle to the CBC shell. Hold bolts from inside with socket
wrench. Two personnel are required.
REPLACE
1. Apply sealer P/N 700145 to the area to be covered with the chest handle. Replace chest handle and
fasten with five screws, nuts and washers (1). Tighten securely.
END OF TASK
0019 00-1/(2 blank)
|
