|
| |
Back
2-WAY VENTILATOR | Up
TM-10-5411-231-13P Cargo Be Cover (CBC) HMMWV Type I Manual | Next
CHEST HANDLE |
TM 10-5411-231-13&P
CARGO BED COVER (CBC) HMMWV, TYPE I
0018 00
FOLDING STEP
THIS WORK PACKAGE COVERS:
Remove, Replace
INITIAL SETUP:
Maintenance Level
Materials/Parts
Unit
Screws 5/16-18, 1.25 lg;
Tools and Special Tools
Washers, Lock No. 12; Flat
Combo Wrench, 1/2”
Washers No. 12; Nuts 5/16-18;
Wrench, 1/2” Socket
Folding Step P/N 104055;
Sealing Compound P/N 700145
GENERAL
This procedure contains information and instructions to keep CBC folding step assemblies in good
working order by removing and replacing damaged parts.
REMOVAL
1. Using socket wrench (see WP 0023 00, Table 0023 00-2 , Item 1), remove two bolts, nuts and
washers (1), one set from top part of step and one set from bottom part of step, which hold the
folding step to the CBC shell. Hold bolts from the outside with combo wrench, to remove folding step.
REPLACE
1. Apply sealer P/N 700145 to the area to be covered with the step. Replace folding step with bolts,
nuts and washers (1). Tighten securely.
END OF TASK
0018 00-1/(2 blank)
|
