|
| |
Back
CAB ACCESS DOOR | Up
TM-10-5411-231-13P Cargo Be Cover (CBC) HMMWV Type I Manual | Next
ACCESS PLATE CONT. |
TM 10-5411-231-13&P
CARGO BED COVER (CBC) HMMWV, TYPE I
0015 00
ACCESS PLATE
THIS WORK PACKAGE COVERS:
Remove, Replace
INITIAL SETUP:
Maintenance Level
Materials/Parts
Unit
Screws 10-24, .88 lg; Washers,
Tools and Special Tools
Flat No. 10; Washers, Lock No. 10;
Screwdriver, Philips #2
Nuts 10-24; Screw 6-32, .25 lg;
Wrench, 3/8” Socket
Access Plate P/N AP40W;
Cable Boot P/N 18-4055;
Lanyard P/N MS25083-2CC28;
Sealing Compound P/N 700145
GENERAL
This procedure contains information and instructions to keep CBC access plate assemblies in good
working order by removing and replacing damaged parts.
REMOVAL
1. Using Philips screwdriver and wrench (see WP 2300 00, Table 0023 00-2, Item 1), remove screw,
nut and washer (1) holding lanyard (2) to the inside of CBC shell, by loosening nut from inside.
2. Turn access plate (5) counter-clockwise and remove.
3. Using Philips screwdriver and wrench, remove additional five screws, nuts and washers (3) from
inside CBC on cable boot (4), by loosening nuts from inside. Two personnel are required. Remove
cable boot.
4. Remove other end of lanyard from access plate by removing screw.
0015 00-1
|
