TM 10-5411-231-13&P CARGO BED COVER (CBC) HMMWV, TYPE I 0014 00 CAB ACCESS DOOR     THIS WORK PACKAGE COVERS: Remove,  Replace INITIAL SETUP: Maintenance Level Materials/Parts Unit Screws 10-24 x 5/8 lg; Tools and Special Tools Washers #10; Nuts 10-24 Drill with 1/8” Bit Self-Lock; Cab Access Door P/N 104002; Sealing   Compound P/N 700145   GENERAL This procedure contains information and instructions to keep CBC cab access door assemblies in good working order by removing and replacing damaged parts or the entire cab access door. REMOVAL 1.    Using drill (see WP 0023 00, Table 0023 00-2, Item 3), drill out eleven pop rivets (1) holding the upper track (2) to the CBC shell.  Remove track and then remove both door halves (3). REPLACE 1.    Apply sealer across entire back of track. 2.    Set door halves into rail of  lower track (4).  Set upper track (2) with sealer applied on top of door halves against CBC.  Fasten with eleven screws, nuts and washers. Tighten securely.        END OF TASK 0014 00-1/2 blank