TM 9-4520-272-14&P
0076 00
3. Remove the two arms (5) of the governor assembly (6) by removing two pins (7).
4. Remove cap (8) on end of shaft (9).
5. Remove governor assembly (6) by pulling from shaft (9).
6. Remove pin (10) that extends through shaft (9).
7. Slide oil pump assembly (11) out through front of crankcase cover (2). Remove outer rotor (12).
Discard governor assembly (6) and cap (8).
8
5
6
7
6
9
10
0076 00-2