TM 10-4520-262-12&P 0029 00
0029 00-2
6. To install a new combustion air inlet assembly (1), insert the longer end of the assembly into the
opening on the lower housing assembly (4) and rotate it into position under the combustion
blower assembly inlet (9). Slide the hose clamp (8) over the end of the combustion air inlet
assembly (1).
7. Install the combustion air inlet assembly (1) over the combustion air blower assembly inlet (9).
Note that a slight back and forth rotating motion may be required. Tighten the hose clamp (8)
securely.
8. Position the combustion air inlet assembly (1) against the lower housing assembly (4) and install
the combustion air inlet fitting (7) over the end of the combustion air inlet assembly.
9. Position the bracket (6) over the end of the combustion air inlet (1). Secure with two screws (5).
10. Install the combustion air inlet cover (3) and secure with two quarter-turn screws (2).
END OF WORK PACKAGE
1
2
3
4
5
6
8
7
9