TM 5-6115-365-15
C1
Section III. OPERATOR'S MAINTENANCE INSTRUCTIONS
4-7. Transfer Switch Indicating Lamps
a.
Removal. Remove lens and remove indicator
lamp as illustrated in figure 4-6.
b.
Installation. Install the indicator lamp and lens
as illustrated in figure 4-6.
4-8. Field Expedient Repairs
Trouble
Probable cause
Remedy
Power transfer switch
Switch on terminal board
Disconnect generator
will not supply power
defective.
from transfer cables
to load.
and connect load
cables directly to
the individual ter-
minal boards of the
generator sets.
4-9