Section II FUEL CONTROL - PREPARATION FOR STORAGE OR SHIPMENT

TM 55-2840-254-23

Section II FUEL CONTROL - PREPARATION FOR STORAGE OR SHIPMENT

6-7

6-7 PRESERVE FUEL CONTROL

General Safety Instructions:

All

Lubricating oil (E31) can cause paralysis

Tools:

Powerplant Mechanic's Tool Kit,

if swallowed. Prolonged contact with it

NSN 5180-00-323-4944

may irritate the skin. Handle only in

Hose Assembly (Appendix E) (2)

well-ventilated areas away from heat and

Socket Wrench Handle

flame. Drain and store in approved metal

Container, 2 Gallon (2)

safety containers. Avoid prolonged or

repeated contact with skin and do not

take internally. Wash contacted areas of

Materials:

High Pressure Caps

skin thoroughly after handling. If irrita-

Lubricating Oil (E31)

tion of skin results, get medical attention.

Get medical attention for eyes.

Personal Required:

681310 Aircraft Powerplant Repairer (2)

Equipment Condition:

Off Engine Task

Fuel Control Removal (Task 6-1)

NOTE

If fuel control is removed from engine

and is not to be reinstalled for a period

longer than 46 hours, it must be pre-

Served.

1. Place fuel control (1) in horizontal position.

2. Install three high pressure caps (2) on three

fittings (3).

GO TO NEXT PAGE

6-31