CLEAN FUEL CONTROL (Continued)

TM 55-2840-254-23

6-3

6-3 CLEAN FUEL CONTROL (Continued)

2. Clean strainer element (2), ball (3), cover (4),

spring (5), retaining ring (6), and retainer (7).

Use dry cleaning solvent (E17).

When using compressed air for cleaning,

use approved proactive equipment for

eyes and face. Do not use more than

30 psig air pressure. Do not direct air

toward yourself or another person.

Failure to comply could result in in-

jury to eyes or skin. In case of injury,

get medical attention.

3. Wear goggles. Blow dry strainer element (2) us-

ing clean, dry compressed air.

FOLLOW-ON MAINTENANCE:

Inspect Fuel Control (Task 6-4).

END OF TASK

6-15