REPLACE COMBUSTOR CASE NUT PLATES (AVIM)

TM 55-2835-209-23 Section IX REPLACE COMBUSTOR CASE NUT PLATES 3-9 REPLACE COMBUSTOR CASE NUT PLATES (AVIM) This task covers: a. Removal b. Installation INITIAL SETUP Tools: Aircraft Inspection Tool Kit (T49) Engine Repairman’s Tool Kit (T47) Personnel Required: 68B Aircraft Powerplant Inspector 68B Aircraft Powerplant Repairer Materials/Parts: Acid Brush (D5) Blind Rivet Epoxy Primer (D30) Machinery Towel (D20) Nut Plate 1,1,1-Trichloroethane (D41) References: Task 3-9 TM 55-1500-204-25/1 Equipment Conditions: Combustor Case Removed From APU General Safety Instructions: Compressed air is dangerous when directed toward yourself or another person. The air- stream or material blown by the airstream can cause inju- ry, particularly to the eyes and face. Use goggles to pro- tect eyes and face. Do not exceed 30 PSI. Do not direct airstream toward yourself or another person. Epoxy primer is flammable and toxic to eyes, skin and res- piratory tract. To prevent personnel injury, skin and eye protection is required. Avoid prolonged or repeated contact. Good general ventilation is normally adequate. Power tool operations create airborne particles. Eye pro- tection is required. Remove jewelry prior to use. Ade- quate ventilation or respira- tor is required. 1,1,1-Trichloroethane is toxic to skin, eyes and respiratory tract. Skin and eye pro- tection are required. Avoid repeated or prolonged contact. Work in a well-ventilated area. Change 1 3-19