• Chapter I Introduction And Engine-General
• Section Ii. Equipment Description And Data
• Location And Description Of Major Components (Cont)
• Equipment Data
• Equipment Data (Cont)
• Safety, Care, And Handling
• Turbine And Combustor Assemblies
• Drive System
• Fuel System
• Fuel System (Continued)
• Fuel System (Continued)
• Lubrication System
• Lubrication System (Cont)
• Electrical System
• Electrical System (Continued)
• Electrical System (Continued)
• Tools And Test Equipment Requirements
• Inspect Apu And Reusable Shipping Container
• Inspect Apu And Reusable Shipping Container (Continued)
• Remove Apu From Reusable Shipping Container
• Remove Apu From Reusable Shipping Container (Continued)
• Remove Apu From Reusable Shipping Container (Continued)
• Install Lifting Sling
• Install Apu In Assembly Fixture
• Install Apu In Assembly Fixture (Continued)
• Prepare Apu For Use
• Section Vi. Hoisting
• Section Viii Servicing
• Section Viii Servicing
• Service Apu (Continued)
• Draining Apu Oil
• Draining Apu Oil (Continued)
• Changing Apu Oil
• Changing Apu Oil (Continued)
• Section Ix Preventive Maintenance
• Foreign Object Damage (Fod) Inspection
• Apu Preservation For Storage Or Shipment
• Apu Preservation For Storage Or Shipment (Continued)
• Remove Apu From Assembly Fixture
• Remove Apu From Assembly Fixture (Continued)
• Install Apu In Reusable Shipping Container
• Install Apu In Reusable Shipping Container (Continued)
• Install Apu In Reusable Shipping Container (Continued)
• Remove Air Screen Assembly
• Remove Air Screen Assembly (Continued)
• Clean And Inspect Air Screen Assembly
• Clean And Inspect Air Screen Assembly (Continued)
• Repair Air Screen Assembly (Avim)
• Install Air Screen Assembly
• Install Air Screen Assembly (Continued)
• Inspect Compressor Rotor
• Inspect Compressor Rotor (Continued)
• Inspect Compressor Rotor (Continued)
• Clean And Inspect External Lines And Fittings
• Clean And Inspect External Lines And Fittings (Continued)
• Clean And Inspect External Lines And Fittings (Continued)
• Remove External Lines And Fittings
• Remove External Lines And Fittings (Continued)
• Remove External Lines And Fittings (Continued)
• Install External Lines And Fittlngs
• Install External Lines And Fittings (Continued)
• Install External Lines And Fittings (Continued)
• Clean And Inspect Start Bypass Valve
• Remove Start Bypass Valve
• Install Start Bypass Valve
• Inspect Combustor Assembly
• Remove Combustor Section
• Remove Combustor Section (Continued)
• Remove Combustor Section (Continued)
• Remove Combustor Section (Continued)
• Disassemble Combustor Assembly
• Clean And Inspect Combustor Housing
• Clean And Inspect Combustor Housing (Continued)
• Clean And Inspect Combustor Liner
• Clean And Inspect Combustor Liner (Continued)
• Repair Combustor Liner (Avim)
• R E P A I R C R A C K S
• Repair Combustor Liner (Avim) (Continued)
• Repair Combustor Housing (Avim)
• Repair Combustor Housing (Avim) (Continued)
• Assemble Combustor Assembly
• Assemble Combustor Assembly (Continued)
•  Install Combustor Section
•  Install Combustor Section (Continued)
•  Install Combustor Section (Continued)
• Inspect Turbine Wheel
• Inspect Turbine Wheel (Continued)
• Clean And Inspect Turbine Air Inlet Housing
• Clean And Inspect Turbine Air Inlet Housing (Continued)
• Repair Turbine Air Inlet Housing (Avim)
• Remove Start Fuel Nozzle Holder Assembly
• Remove Start Fuel Nozzle Holder Assembly (Cont)
• Clean And Inspect Start Fuel Nozzle Holder Assembly
• Clean And Inspect Start Fuel Nozzle Holder Assembly (Continued)
• Service Start Fuel Nozzle Holder Assembly (Adjustable)
• Install Start Fuel Nozzle Holder Assembly
• Remove Purge Valve Assembly
• Remove Purge Valve Assembly (Continued)
• Clean And Inspect Purge Valve Assembly
• Clean And Inspect Purge Valve Assembly (Continued)
• Install Purge Valve Assembly
• Remove Compressor Fitting Assembly
• Remove Compressor Fitting Assembly (Continued)
• Clean And Inspect Compressor Fitting Assembly
• Clean And Inspect Compressor Fitting Assembly (Continued)
• Install Compressor Fitting Assembly
•  I N S T A L L C O M P R E S S O R F I T T I N G A S S E M B L Y ( C O N T I N U E D ) 2 - 3 3
• Remove Restrictor
• Remove Restrictor (Continued)
• Clean And Inspect Restrictor
• Clean And Inspect Restrictor (Continued)
• Install Restrictor Assembly
• Remove Tee Fitting Bracket Assembly
• Remove Tee Fitting Bracket Assembly (Cont)
• Clean And Inspect Tee Fitting Bracket Assembly
• Clean And Inspect Tee Fitting Bracket Assembly (Continued)
•  Install Tee Fitting Bracket Assembly
• Remove Compressor Fitting Assembly
• Remove Compressor Fitting Assembly (Continued)
• Clean And Inspect Compressor Fitting Assembly
• Clean And Inspect Compressor Fitting Assembly (Continued)
• Install Compressor Fitting Assembly
• Install Compressor Fitting Assembly (Continued)
• Remove Fuel Cover Assembly
• Clean And Inspect Fuel Cover Assembly
• Clean And Inspect Fuel Cover Assembly (Continued)
• Repair Fuel Cover Assembly (Avim)
• Repair Fuel Cover Assembly (Avim) (Continued)
• Install Fuel Cover Assembly
•  Remove Fuel Drain Check Valve Assembly
• Clean And Inspect Fuel Drain Check Valve Assembly
• Clean And Inspect Fuel Drain Check Valve Assembly (Continued) 2-48
• Install Fuel Drain Check Valve Assembly
• Install Fuel Drain Check Valve Assembly (Continued)
•  Inspect Fuel Control
•  Inspect Fuel Control (Continued)
• Remove Fuel Control
• Remove Fuel Control (Continued)
• Remove Fuel Control (Continued)
• Disassemble Fuel Control
• Disassemble Fuel Control (Continued)
• Clean And Inspect Acceleration Control Unit
• Clean And Inspect Acceleration Control Unit (Continued)
• Service Fuel Pump Filter
• Service Fuel Pump Filter (Continued)
• Clean And Inspect Fuel Pump
• Clean And Inspect Fuel Pump (Continued)
• Assemble Fuel Control
• Assemble Fuel Control (Continued)
• Install Fuel Control
•  Install Fuel Control (Continued)
• Remove Fuel Inlet Filter
• Remove Fuel Inlet Filter (Continued)
• Install Fuel Inlet Filter
•  Install Fuel Filter (Continued)
• Remove Fuel Manifold Assembly
• Clean And Inspect Fuel Manifold Assembly
• C L E A N A N D I N S P E C T M A N I F O L D A S S E M B L Y ( C O N T I N U E D )
• I N S T A L L F U E L M A N I F O L D A S S E M B L Y 2 - 6 2
•  Install Manifold Assembly (Continued)
• Remove Main Fuel Solenoid Valve
• Remove Main Fuel Solenoid Valve (Continued)
• Install Main Fuel Solenoid Valve
•  Install Main Fuel Solenoid Valve (Continued)
• Remove Max And Start Fuel Solenoid Valves
• Remove Max And Start Fuel Solenoid Valves (Continued)
• Install Max And Start Fuel Solenoid Valves
• Install Max And Start Fuel Solenoid Valves (Continued)
• Remove Base Assembly
• Remove Base Assembly (Continued)
• Clean And Inspect Base Assembly
• Clean And Inspect Base Assembly (Continued)
• Repair Base Assembly (Avim)
• Repair Base Assembly (Avim) (Continued)
• Install Base Assembly
• Install Base Assembly (Continued)
• Remove Ignition Exciter
• Remove Ignition Exciter (Continued)
• Repair Ignition Exciter
• Clean And Inspect Ignition Exciter
• Install Ignition Exciter
•  Install Ignition Exciter (Continued)
• Remove Ignition Cable
• Remove Ignition Cable (Continued)
•  Install Ignition Cable
• Remove Igniter Plug
• Clean And Inspect Igniter Plug
• Install Igniter Plug
• Inspect Engine Electrical Harness Assembly
• Inspect Engine Electrical Harness Assembly (Continued)
• Remove Engine Electrical Harness Assembly
• Remove Engine Electrical Harness Assembly (Continued)
• Install Engine Electrical Harness Assembly
• Install Engine Electrical Harness Assembly (Continued)
• Install Engine Electrical Harness Assembly (Continued)
• Remove Meter Assembly
• Install Meter Assembly
• Clean And Inspect Meter Assembly
• Remove Magnetic Pickup
• Install Magnetic Pickup
• Install Magnetic Pickup (Continued)
• Remove Low Oil Pressure Switch
• Install Low Oil Pressure Switch
• Install Low Oil Pressure Switch (Continued)
• Remove High Oil Temperature Switch
• Remove High Oil Temperature Switch (Continued)
• Install High Oil Temperature Switch
•  Install High Oil Temperature Switch (Continued)
• Remove Oil Filter And Bypass Valve
• Clean And Inspect Filter Bypass Valve
• Clean And Inspect Filter Bypass Valve (Continued)
•  Install Oil Filter And Bypass Valve
• Remove Oil Sight Gage
• Clean And Inspect Oil Sight Gage
• Clean And Inspect Oil Sight Gage (Continued)
• Install Oil Sight Gage
• R E M O V E M A G N E T I C D R A I N P L U G A N D V A L V E 2 - 9 5
• Clean And Inspect Magnetic Drain Plug And Valve
• Clean And Inspect Magnetic Drain Plug And Valve (Continued)
• Install Magnetic Drain Plug And Valve
• Install Magnetic Drain Plug And Valve (Continued)
• Remove Oil Plug And Dipstick
• Clean And Inspect Oil Plug And Dipstick
• Clean And Inspect Oil Plug And Dipstick (Continued)
• Install Oil Plug And Dipstick
• Re.Move Oil Filler Tube And Dipstick Assembly
• Clean And Inspect Oil Filler Tube And Dipstick Assembly 2-100.2
• Clean And Inspect Oil Filler Tube And Dipstick Assebmbly 2-100.2
• Install Oil Filler Tube And Dipstick Assembly
• Remove Drive System
• Remove Drive System (Continued)
• Remove Drive System (Continued)
• Clean And Inspect Drive System
• Clean And Inspect Drive System (Continued)
• Replace Drive System Studs And Inserts (Avim)
• Remove Accessory Drive Assembly
• Remove Accessory Drive Assembly (Continued)
• Replace Accessory Drive Assembly Oil Seals (Avim)
• Replace Accessory Drive Assembly Oil Seals (Avim) (Continued)
•  Install Accessory Drive Assembly
• Install Accessory Drive Assembly (Continued)
• Replace Reduction Drive Assembly Oil Seals (Avim)
• Replace Reduction Drive Assembly Oil Seals (Avim) (Continued)
•  Install Drive System
• Install Drive System (Continued)
•  Install Drive System (Continued)
•  Inspect Spline Adapter
•  Replace Spline Adapter
• Replace Spline Adapter (Continued)
• Appendix A References
• Appendix A References (Cont)
• Appendix B Maintenance Allocation Chart
• Maintenance Allocation Chart
• Use Of The Maintenance Allocation Chart (Section Ii)
• Maintenance Functions
• Functional Groups (Columns 1 And 2.)
• Functional Groups (Columns 1 And 2.)
• Maintenance Categories And Work Times (Column 4).
• Section Ii Maintenance Allocation Chart
• S E C T I O N I I ( C O N T ) Maintenance Allocation Chart
• S E C T I O N I I ( C O N T ) Maintenance Allocation Chart
• Section Ii (Cont) Maintenance Allocation Chart
• Section Ii (Cont) Maintenance Allocation Chart
• Section Ii (Cont) Maintenance Allocation Chart
• Section Ii (Cont) Maintenance Allocation Chart
• S E C T I O N I Ii Tool And Test Equipment Requirements
• Section Iii (Cont) Tool And Test Equipment Requirements
• Section Iv Remarks T-62t-40-T Turbine Engine
• Appendix C Repair Parts And Special Tool List
• Appendix D Expendable Supplies And Materials Section I Introduction
• Section Ii. Expendable Supplies And Materials List (Cont)
• Section Ii. Expendable Supplies And Materials List (Cont)
• Appendix F Torque Limits
• Glossary Section 1. Abbreviation
• Glossary Section 2. Definitions
• Glossary Section 2. Definitions (Continued)
• Glossary Section 2. Definitions (Continued)
• Glossary Section 2. Definitions (Continued)
• Alphabetical Index
• Alphabetical Index (Continued)
• Alphabetical Index (Continijed)
• Alphabetical Index (Continued)
• Alphabetical Index (Continued)
• Alphabetical Index (Continued)
• Alphabetical Index (Continued)
• The Metric System And Equivalents

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing