CLEAN INLET HOUSING COVER ASSEMBLY (AVIM)

TM 1-2840-252-23-2

2-45 CLEAN INLET HOUSING COVER ASSEMBLY (AVIM)

2-45

INITIAL SETUP

Output Shaft Seal and Housing Assembly Re-

Applicable Configurations

Inlet Housing Cover Assembly Removed (Task

All

Tools

General Safety Instructions:

None

WARNING

Materials,

Dry cleaning solvent (E19) is flammable

Dry Cleaning Solvent (El 7)

and toxic. It can irritate skin and cause

Gloves (E24)

burns. Use only in well-ventilated area,

Dry, Lint-Free Cloth (E30)

away from heat and open flame. In case

Personnel Required:

of contact, immediately flush skin or

Aircraft Powerplant Repairer

eyes with water for at least 5 minutes

Equipment Condition:

Get medical attention for eyes.

Off Engine Task

Engine Oil System Drained (Task 1-69)

1. Wear gloves (E24) Clean inlet housing cover

assembly (1). Use lint-free cloth (E30) damp-

ened in dry cleaning solvent (El 7)

2. Wipe dry using clean, dry, lint-free cloth (E30)

FOLLOW-ON MAINTENANCE

Inspect Inlet Housing Cover Assembly (Task 2-46)

END OF TASK

2-348