INSPECT OUPUT SHAFT SEAL AND HOUSING ASSEMBLYNG (Cont)

TM 1-2840-252-23-2

2-42

REPAIR OUTPUT S AFT SEAL AND HOUSING ASSEMBLY (Continued)

2-42

d. Clean housing (5)as follows

WARNING

Dry cleaning solvent (E19) is flammable

and toxic. It can irritate skin and cause

burns. Use only in well-ventilated area,

away from heat and open flame. In case

of contact, immediately flush skin or

eyes with water for at least 15 minutes.

Get medical attention for eyes.

(1) Wear gloves (E24) Immerse and agitate in dry

cleaning solvent (E19) Use brush in seven

grooves (9)

(2) Wipe dry using clean, dry, lint-free cloth (E30)

WARNING

When using compressed air for cleaning,

use approved protective equipment for

eyes and face. Do not use more than 30

psig air pressure. Do not direct air

toward yourself or another person.

Failure to comply could result in injury

to eyes or skin In case of injury, get

medical attention.

(3) Wear goggles. Blow dry seven grooves (9)

and 16 air-bleed holes (10).

GO TO NEXT PAGE

2-332