CALIBRATION PROCEDURE FOR ELECTRONIC VOLTMETER ME-202C/U

DEPARTMENT OF THE ARMY TECHNICAL BULLETIN

CALIBRATION PROCEDURE FOR

ELECTRONIC VOLTMETER

ME-202C/U

Headquarters, Department of the Army, Washington, DC

7 June 2005

Distribution Statement A: Approved for public release, distribution is unlimited.

REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS

You can improve this manual. If you find any mistakes or if you know of a way to improve

these procedures, please let us know. Mail your letter or DA Form 2028 (Recommended

Changes to Publications and Blank Forms) directly to Commander, US Army Aviation and

Missile Command, AMSAM-MMC-MA-NP, Redstone Arsenal, AL 35898-5000. A reply will be

furnished to you. You may also provide DA Form 2028 information to AMCOM via e-mail, fax,

or the World Wide Web. Our FAX number is: DSN 788-6546 or Commercial 256-842-6546.

Our e-mail address is: 2028@redstone.army.mil. Instructions for sending an electronic 2028

may be found at the back of this manual.

For the World Wide Web, use:

https://amcom2028.redstone.army.mil.

Paragraph

Page

SECTION

IDENTIFICATION AND DESCRIPTION

Test instrument identification ............................

Forms, records, and reports.................................

Calibration description ........................................

EQUIPMENT REQUIREMENTS

Equipment required .............................................

Accessories required.............................................

CALIBRATION PROCESS

Preliminary instructions......................................

Equipment setup ..................................................

TVM accuracy .......................................................

Dc voltage (differential) accuracy........................

Ac voltage (differential) accuracy........................

Final procedure ....................................................

_________

*This bulletin supersedes TB 9-6625-2252-35, dated 29 March 1991.