RF Output

TB 9-6625-2182-35

Table 4. Frequency

Frequency counter

Test instrument

indications

DATA

frequency

Min

Max

100 kHz

99.999

kHz

100.001

kHz

500 kHz

499.995

kHz

500.005

kHz

1 MHz

999.990

kHz

1.000010

MHz

5 MHz

4.99995

MHz

5.000050

MHz

10 MHz

9.999900

MHz

10.000100

MHz

50 MHz

49.999500

MHz

50.000500

MHz

100 MHz

99.999000

MHz

100.001000

MHz

(2) Press RF OFF/ON pushbutton to OFF.

(3) Move connection on frequency counter from input A to input C.

(4) Press RF OFF/ON pushbutton to ON.

(5) For each row in table 5, press TI ENTRY - FREQ pushbutton and enter DATA

frequency. Frequency counter will indicate within the limits specified.

Table 5. Frequency

Frequency counter

Test instrument

indications

DATA

frequency

Min

Max

500 MHz

499.995000

500.005000

1300 MHz

1299.987000

1300.013000

1900 MHz

1899.981000

1900.019000

(6) Press RF OFF/ON pushbutton to OFF.

(7) Disconnect equipment setup.

b. Adjustments. No adjustments can be made.

10. RF Output

a. Performance Check

(1) Set measuring receiver as listed in (a) through (f) below:

(a)

Connect sensor module to measuring receiver.

(b)

Zero, calibrate, and save sensor values.

(c)

Press INSTR PRESET pushbutton.

(d)

Press LOG/LIN to LOG (dBm) pushbutton.

(e)

Enter 32.0 SPCL (0.01 dB resolution).

(f)

Connect sensor module to TI OUTPUT RF connector.

(2) Connect TI 10 MHz OUT (rear panel) to measuring receiver 10 MHz IN (rear panel).

(3) Press TI pushbuttons as listed in (a) through (c) below:

(a) INSTR PRESET.

(b) ENTRY - FREQ.