|
| |
TM 55-2915-335-30&P
2-15. PUMP HOUSING / MOUNTING FLANGE - lNSPECT/REPAIR
2-15
This task covers Inspection and repair of the housing mounting flange, cartridge bore, and inlet screen.
INITIAL SETUP
Tools:
Material/Parts:
Aircraft Electrician’s Tool Kit,
Cleaning Cloth, Nonwoven, NSN 8305-00-753-2967
NSN 5180-00-323-4915
500 or 600 Grit, Wet or Dry Emery Paper
Cold Chisel, 1/4 Inch Cut, NSN 5110-00-234-1927
Dry Cleaning Solvent, NSN 6850-00-274-5421
Twist Drill, No. 43, NSN 5133-00-189-9288
Locking Compound, NSN 8030-00-180-6222
Drill, Hand Electric, 1/4 inch size,
NSN 5130-00-889-8994, or equivalent
Equipment Condition
Canister removed from pump housing PARA 2-11
Personnel Required:
68F Aircraft Electrician
1. CLEANING
Cleaning solvent can be hazardous to your health. Use solvent only
in well ventilated areas. Avoid breathing solvent vapors. Do not use
solvent near an open flame or other source of high heat. Always wear
gloves, apron, and goggles when using cleaning solvent. Store solvent
in approved metal container only.
a. Wash pump housing in dry cleaning solvent (Item 7, Appendix C). Use non-woven cleaning cloth (Item 1, Ap-
pendix C) to wash outside of pump housing.
GO TO NEXT PAGE
2-40
|
