|
| |
TM 5-4320-304-14
TM 08922A-14/1
5-14. lNSPECT/REPLACE/REPAIR FRAME ASSEMBLY (FRAME, RAILS, AND
SHOCK MOUNTS) (Continued)
7
Install helicoil insert to a depth of 1 to 1.5 pitches below the surface of the tapped hole in the
frame (7). Wipe off excess primer.
8
Remove drive tang from installed helicoil insert (8).
INSTALLATION:
1
2
3
4
5
6
Install two shock mounts (4) in right rail (6).
Install two washers (3), lock washers (2), and cap screws (1) through right rail (6) and into
frame (7).
Tighten cap screws (1) securely.
Install two shock mounts (4) in left rail (5).
Install two washers (3), lock washers (2), and cap screws (1) through left rail (5) and into
frame (7).
Tighten cap screws (1) securely.
5-49/(5-50 blank)
|
