DISASSEMBLY AND PREPARATION FOR MOVEMENT

TM 10-7360-209-13&P

2-7. DISASSEMBLY AND PREPARATION FOR MOVEMENT. The KCLFF and KCLFF-E may be transported on a HM,

CUCV, 2 1/2-ton truck, or 5-ton truck. KCLFF and KCLFF-E components and accessories that must be included for

movement to a new site are listed in appendix D.

WARNING

· Allow M2 burner units and lantern to cool before releasing air pressure from fuel tanks. Do not

smoke and make sure there is no open flame in the vicinity. Fuel fumes are explosive and highly

flammable.

· Bleed all M2 burner units and lantern of air before storage.

· Dram all fuel from equipment into gasoline cans before movement or storage.

a. Disassembly

(1) Remove the M2 burner units from the Heater Tank Assembly and the Cooking Pot Cradle * Assembly. For

the KCLFF-E, remove the M2 burner units from the Range Outfit and the Cooking Pot Cradle Assembly with Griddle

Assembly installed. Drain the gas tanks and prepare units for movement in accordance with TM 10-7360-204-13&P.

(2) Return M2 burner units to Heater Tank Assembly, Cooking Pot Cradle Assembly burner rack and I to the

bottom position of the Range Cabinet. For the KCLFF- E, return M2 burner units to the Range Outfit and the Cooking Pot

Cradle Assembly burner rack.

(3) Remove can opener from Table Assembly and fold up both Table Assemblies.

b. Parking.

(1) Pack KCLFF accessories in Heater Tank Assembly.

(2) Pack the components of the KCLFF-E as follows:

In the TOOL CHEST:

Thread compound, antiseize

Brush, wire

Cleaner, burner slot

Hose (spare)

Hose, pump, inflating

Spout, can, gasoline

Pump, inflating

Screwdriver, flat

Screwdriver, crosstip

Wrench, combination

Can and slip cover top

In the HEATER TANK:

Tool Chest complete with packed items

Bag, drinking water storage

Board, food slicing chopping

Fire extinquisher

2-20 Change 3