WARNING (cont)

TM 10-7360-209-13&P

· Do not use flammable material as a base for the KCLFF or KCLFF-E. Fire may cause injury to personnel or

damage to equipment

· Allow M2 burner units and lantern to cool before releasing air pressure from fuel tanks. Do not smoke and

make sure there is no open flame in the vicinity. Fuel fumes are explosive and highly flammable.

· Extreme heat will cause tank pressure to increase because of fuel expansion. Make sure you start with

prescribed pressure LAW TM 10-7360-204-13&P.

· Dry cleaning solvent A-A-711 TY1 (item 3, Appendix F) used to dean parts is potentially dangerous to

personnel and property. Avoid repeated and prolonged skin contact Do not use near open flame of excessive heat. Flash

point solvent is 100 to 138'F (38 to 59'C).

b Change 3