UNPACKING THE MKT COMPONENTS (Cont)

TM 10-7360-206-13

0005 00

Install the four end screens (1). If used, install the foul weather cover assemblies using the same

procedure shown on the previous page. The foul weather covers are installed over the screening, or may

be installed in place of the screening. Foul weather covers are also used under blackout conditions.,

Secure the bottom edge of screens (1) and covers (2) to the ramps with nylon elastic cord (3) and S

Hooks (4). For increased air circulation: Insert the large ends of the Strut Fabric Holdout Assemblies (5)

into the four holes in the outboard edge (6) of the ramps on the right and left sides of the kitchen. Hook the

four bottom side cover S hooks (4) onto the strut pins (7).

0005 00-34