DISCONNECTING TOW VEHICLE FROM TRAILER

TM 10-7360-206-13

0005 00

DISCONNECTING TOW VEHICLE FROM TRAILER

WARNING

INJURY CAUTION

Before disconnecting trailer from towing vehicle, lower one or both rear

leveling jack assembly into down position and lock to prevent the kitchen

from tipping when it is released.

WARNING

INJURY CAUTION

The leveling jacks are heavy and will swing free when the push-lock pins

are removed. To avoid serious injury keep your head out from under the

trailer when lowering jacks.

Lower one or both of the rear leveling jacks (1). Remove the push-lock pin (2) from the jack brace

assembly (3) and let the jack brace (3) hang down. Now remove the push-lock pin (2) from the leveling

jack (1). Allow the leveling jack to swing down into a hanging position. Connect the jack brace (3) to the

leveling jack (1) and secure the jack brace (3) with the push-lock pin (2).

Lift side travel covers to remove the jack handles (4) from their storage locations on the side ramps.

Remove the jack handle (4) from its storage place on the side ramp. Insert the jack handle (4) into the

leveling jack (1) through the hole in the trailer frame (5). Turn the handle to lower the jack foot pad (6) to

within 4 to 6 inches of the ground.

0005 00-3