MAINTENANCE FORMS RECORDS AND REPORTS.

TM 10-7360-206-13

0001 00

MAINTENANCE FORMS RECORDS AND REPORTS.

Department of the Army forms and procedures used for equipment maintenance will be those prescribed

by DA PAM 738-750, Functional Users Manual for The Army Maintenance Management System

(TAMMS) (Maintenance Management Update).

REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIRs).

If your MKT needs improvement, let us know. Send us an EIR. You, the user, are the only one who can

tell us what you don=t like about your equipment. Let us know why you don=t like the design or

performance. Put it on an SF368 Product Quality Deficiency Report . Mail it to: Commander U.S. Army

Soldier and Biological Chemical Command; ATTN: AMSSB-RIM-L(N), Kansas St. Natick MA 01760-5052.

We will send you a reply.

WARRANTY INFORMATION

MODELS MKT-75, MKT-75A, MKT-85, AND MKT-85S. These models are warranted by Penn Metals

Fabricators. Inc. for 12 months. Warranty starts on the date found on DA Form 2410 or DA 2408-16 In the

logbook. Report all defects in material or workmanship to your supervisor who will take appropriate action.

MODEL MKT-82. This model of the kitchen is warranted by Spinks Industries Inc. for 12 months.

Warranty starts on the date found on DA Form 2410 or DA Form 2408-16 In the logbook. Report all

defects in material or workmanship to your supervisor who will take appropriate action.

MODEL MKT-90. This model of the kitchen is warranted by Atlantic Industries, Inc. for 12 months.

Warranty starts on the date found on DA Form 2410 or DA Form 2408-16 in the logbook. Report all

defects in material or workmanship to your supervisor who will take appropriate action.

MODEL MKT-95. These models are warranted by Penn Metal Fabricators, Inc. for 12 months. Warranty

starts on the date found on DA Form 2410 or DA Form 2408-16 in the logbook. Report all defects material

or workmanship to your supervisor who will take appropriate action.

MODEL MKT-99. These models are warranted by Penn Metal Fabricators, Inc., for 12 months. Warranty

starts on the date found on DA Form 2410 or DA Form 2408-16 in the logbook. Report all defects material

or workmanship to your supervisor who will take appropriate action.

CORROSION PREVENTION AND CONTROL (CPC).

Corrosion Prevention and Control (CPC) of Army materiel is a continuing concern. It is important that any

corrosion problems with this item be reported so that the problem can be corrected and improvements can

be made to prevent the problem in future items.

While corrosion is typically associated with rusting of metals, it can also include deterioration of other

materials, such as rubber or plastic. Unusual cracking, softening, swelling or breaking of these materials

may be a corrosion problem.

If a corrosion problem is identified, it can be reported using SF 368, Product Quality Deficiency Report.

Use of key words such as "corrosion", "rust", "deterioration" or "cracking" will ensure that the information is

identified as a CPC problem. This form should be submitted to the address specified in DA Pam 738-750.

0001 00-3