Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: TABLE 4-2, TROUBLESHOOTING - Cont
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 

Back
TABLE 4-2. TROUBLESHOOTING
Up
TM-10-7360-204-13P Range Outfit Field Gasoline Model M59 Manual
Next
LIFTING   HANDLES   AND   LATCHES

TM 10-7360-204-13&P TABLE  4-2,  TROUBLESHOOTING  -  Continued MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION 8.  PRESSURE  RISES  ABOVE  SAFE  LIMIT  ON  AIR  PRESSURE  GAGE. Step 1. Fuel  tank  too  full. Fill with only 8 quarts (7.6 liters) of gasoline. S t e p   2  . Air pressure gage is defective. Replace  gage. Section   VI.   MAINTENANCE   PROCEDURES 4-8.   CABINET. This  section  contains  the  maintenance  instruction  for  the  cabinet.  It  includes  the  lid  lifting  handles  and latches,  and  cradle. 4-8.1   LID   ASSEMBLY. a.  General.   The  lid  is  attached  to  the  top  of  the  cabinet  by  lid  hinges.  The  whole  lid  assembly  is  fas- tened  to  the  cabinet  by  two  wing  nuts  that  screw  into  the  lid  hinge. b.   Removal. (1) Loosen  the  two  wing  nuts  (l). (2)  Align  the  lid  brace  (2)  with  its  retaining  pin  (3)  so  that  the  brace  can  be  slipped  over  the  head  of  the lid  retaining  pin. (3)  Lift  the  lid  off  of  the  cabinet. (4) To  remove  the  hinge  retainers  (4),  remove  the  screws  (5)  securing  them  to  the  cabinet.  The  retainers and  wing  nuts  come  apart  when  the  screws  are  removed. c.    Replacement. (1)  If  the  wing  nuts  have  been  removed,  insert  them  into  their  matching  holes  on  the  cabinet.  Slide  the lid  hinge  retainers  (4)  over  the  wing  nuts  (1)  and  align  holes  in  retainers  with  the  holes  in  the  cabinet.  Insert mounting  screws  (4)  and  tighten. (2) Align  holes  in  lid  hinge  with  wing  nuts  (1)  and  tighten  nuts. (3) Fit lid retainer pin head (3) into lid brace (2) and lower lid. 4-5

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing