Figure 9. Location of cable clamp on the MKT platform frame.

MWO 10-7360-206-30-1

before install the screws. Position them according to Figure 7 and Figure 9 (section B-

B).

Attach cable clamp (item 11) to frame

using self-drilling screw (item 23)

Section B-B

Figure 9. Location of cable clamp on the MKT platform frame.

e. Installation of power converter bracket.

1) Insert one 5 inch carriage bolt (Item 22) into each of the square holes of the power

converter bracket (Item 27) and capture each carriage bolt using one 5/16 inch nut (Item

CAUTION: Position the nut according to Figure 10. This will allow the carriage to fit

loosely in the bracket, reducing the chance of damage to the bolts or personal injury when

the storage cabinet is removed for cleaning. DO NOT TIGHTEN 5/16 INCH BOLT.