Figure 6. Location of cable pass-through hole inside storage cabinet.

MWO 10-7360-206-30-1

Front edge of platform

Storage Cabinet Frame

Drill 1 3/8 inch hole and

insert grommet (item 12)

Figure 6. Location of cable pass-through hole inside storage cabinet.

c. Drilling the cross-way holes.

1) Locate and drill two, 1-3/8 in. holes through the channel sections of the MKT

platform frame and insert one grommet (Item 12) into the hole. See Figure 7 and Figure

8 for hole locations. The frame can only be accessed from underneath the front of the

MKT trailer. These frame members are 3/8 inch thick aluminum channel sections. They

sit directly on top of the trailer frame. DO NOT DRILL THROUGH THE TRAILER

FRAME.