Figure 5. Location of cable pass through hole in platform near condiment cabinet.

MWO 10-7360-206-30-1

2) Drill a 1 - 3/8 inch hole in the aluminum platform deck in the position shown in

Figure 5 and insert grommet (Item 12) in hole.

Front of MKT

Front edge of platform

Condiment Cabinet

Edge of platform

Drill, 1 3/8 inch hole and

insert grommet (Item 12)

Figure 5. Location of cable pass through hole in platform near condiment cabinet.

3) Gain access to the platform deck inside the storage cabinet by opening the cooling

cabinet door. Drill a 1-3/8 inch hole in the aluminum platform deck in the position

shown in Figure 6. Use reference dimensions from the storage cabinet frame to position

the hole. NOTE: If the storage cabinet is removed, use the alternate dimensions from the

edge of the platform in Figure 6 to position the hole. Insert one grommet (Item 12) into

the hole.