MODIFICATION PROCEDURES

MWO 10-7360-206-30-1

Item 28, Qty. 1,

Hold down bar

9. SPECIAL TOOLS; TOOL KITS; JIGS; TEST MEASUREMENT AND

DIAGNOSTIC EQUIPMENT (TDME); AND FIXTURE REQUIRED:

SC 4910-95-A74, (NSN) 4910-00-754-0654 SHOP EQUIPMENT. 1-3/8 inch drill bit,

or hole saw for drilling aluminum plate, and cutting fluid for aluminum.

10. MODIFICATION PROCEDURES:

WARNING. Wear safety shatterproof glasses or goggles when drilling under the Trailer

platform deck and the storage cabinet.

a. Modification of the storage cabinet.

1) Drill 1-3/8 inch holes in the three aluminum panels of the storage cabinet. Refer to

Figure 1 for the storage cabinet location, Figure 2 for the panel locations, and Figure 3 for

the hole location in each panel and insert a grommet (Item 13) into the holes in panels 1

and 2.