Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: Pump Body Assembly
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 

TM 5-4210-220-34 2-10. PUMP BODY. 2-10.1    Pump Body Assembly. This task covers: a.    Removal b.    Inspection c.    Installation d.    Repair TOOLS MATERIALS/PARTS Shop Equipment, Automotive 101952 Pump Body Maintenance and Repair, MS90725-172 Bolt NSN 4910-00-754-0705 MS27183-21 Washer 100036 Washer EQUIPMENT CONDITION 310591 Locknut All Piping Drained (see TM 5-4210-220-12) Main Engine Shutdown (see TM 5-4210-220-12) PERSONNEL REQUIRED - 2 APU Shutdown (see TM 5-4210-220-12) Batteries Disconnected (see TM 5-4210-220-12) Wheels Blocked All Air Tanks Drained Pump Body Heat Shield Removed (see TM 5-4210-220-12) Radiator Drained (see LO 5-4210-220-12) Winterization Heater Exhaust Removed (see TM 5-4210-220-12) Winterization Heater and Supports Removed (see TM 5-4210-220-12) Pump Body Heater Removed (see TM 5-4210-220-12) WARNING Injury to personnel or damage to equipment could occur from improper hoisting.  Hoist the load slowly to avoid damaging components, slipping slings or load shift.  Do not jerk the load  or  swing  it  from  side-to- side  when  hoisting.    This  places  additional  stress  on  hoisting  components  which  can  cause  failure  and loss of load.  Be sure hoisting equipment is on solid footing and is suitable for the size of the load.  Watch boom angle and overhead clearance when hoisting. NOTE To  remove  and  install  the  truck  pump  body,  the  workshop  must  be  equipped  with  an  overhead  hoist  or crane.  The hoist or crane should have a lifting capacity of at least 1000 lb (454 kg) to height of at least 16 ft (4.9 m) from floor level. REMOVAL (1)     Disconnect and remove hoses from cross-lay hose beds. (2)     Remove pump body access panels and unplug pump body wiring harness from engine harness and remove ties attaching harness to other wiring. (3)  Disconnect heater hose from hose reel blower.  Drop hose through pump body. 2-34

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business