|
| |
Back
Figure 4-9. Unisex Coupling Dust Cap Replacement | Up
TM-10-4330-237-13P Filter-Separator Water Liquid Fuel for Advanced Aviation Forwarded Area Refueling System (AAFARS) Model E72FS-Z001 Manual | Next
Figure 4-10. Unisex Coupling Bumper and Lug Replacement. |
TM 10-4330-237-13&P
b. Assembly. (Figure 4-9)
WARNING
Rubber gloves should be worn when handling fueling system components due to
the toxic effects of some fuel additives.
(1)
If necessary to install attaching cable (3) on 3-inch unisex coupling dust cap (1), thread attaching cable (3)
through split ring (5) on dust cap (1). If necessary to install attaching cable (3) on 2-inch unisex coupling dust cap
(1), thread attaching cable (3) through dust cap (1) forming a loop. Use a sleeve (6) and crimp loose end of cable
to itself.
(2)
Install dust cap (1) and attaching cable (3) to unisex coupling (2) by threading attaching cable (3) through split ring
(4) on unisex coupling (2).
(3)
Install dust cap (1) onto unisex coupling (2).
4.13 REPLACE UNISEX COUPLING BUMPER.
This task consists of:
a. Removal
b. Assembly
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Tool kit, General Mechanics
None
(Appendix B, Section III, Item 1)
Chemical and Oil Protective Gloves
(Appendix B, Section III, Item 2)
General Safety Requirements:
Equipment Condition:
Liquid fuel filter-separator removed from
WARNING
AAFARS. (TM 10-4930-250-13&P, para. 2.8.)
·
Fuels are toxic and flammable. Do not get on person
or clothing. Work in well ventilated area. Do not
smoke. Ensure equipment is well grounded.
a. Removal. (Figure 4-10)
WARNING
Rubber gloves should be worn when handling fueling system components due to
the toxic effects of some fuel additives.
(1)
Remove dust cap (1) from unisex coupling (2).
4-22
|
