Casualty control board

Figure 1-8.—Casualty control board. Stage II deals with the system component level for the stage I documentation shown in under supervision of the space supervisor. In stage II, the space supervisor accomplishes the tasks delegated by the plant supervisor (EOOW under way and EDO in port). The EOP documentation assists the space supervisor in properly sequencing events, controlling the operation of equipment, maintaining an up-to-date status of the opera- tional condition of the equipment assigned, and training personnel. To assist the space supervisor in the effort, the EOP section provides the follow- ing stage II documents: l l l Index pages listing each document by identification number and title for each specified operating group, such as engine rooms (ERs), auxiliary machinery rooms (AMRs), or electrical systems. Space procedure charts providing the step- by-step procedures to accomplish and support the requirements of the plant procedure charts. Space status board providing a layout of major systems. Allows maintenance personnel and watch standers a visual plot as to the systems alignment and equipment operating status. This board is similar in configuration to the casualty control board figure 1-8. Diagram for electrical plant status showing generators, switchboards, and shorepower connections within the electrical distribu- tion systems. This diagram is provided in both the electrical operating group and in the stage I (EOOW) documentation for maintaining a plot of the system align- ment. Diagram for plant steaming conditions used to plan the best generator combina- tions provided in the electrical operating group documentation. This specifies the preferred electric power generator com- bination. This diagram is the same as that provided in the stage I documentation. Training diagrams of each major piping system developed for stage I. Other diagrams include individual systems, such as the fuel oil and main engine lube oil systems located within the machinery spaces. Stage III deals with the system component level under the supervision of component operators. The component operators place 1-16