SUMMARIZE

Figure 3-10.—The LMS-11 Net Display in Summarize Mode. NCS.— The NCS field allows the operator to designate the PU number of the NCS. When a number is not entered in this field, the default address of 77 is used. It will also be used as the PU number in the polling display of the status area and in the PU field of the Net Display. PU.— The PU field is used by the operator to designate the PU whose recurring transmission is used to define a cycle. The PU field works with the SUMMARIZE field. SIDEBAND.— The SIDEBAND field allows the operator to designate which sideband (USB, LSB, or DIV) is used for the information displayed. SUMMARIZE.— The SUMMARIZE field enables the operator to designate the number of cycles over which the summary is computed. A “cycle” is defined as the recurring transmission from the designated PU. The data is tabulated after the specified number of transmissions are received from the designated PU or after 200 transmissions are received by any station, whichever occurs first. The SUMMARIZE field is also used to enable the PU History mode. The PU History mode is entered when the operator enters a zero in the summary field. When the PU History mode is enabled by the operator, the word HISTORY is added to the Net Display title. The PU History mode display updates one line of data immediately after the specified PU has completed its transmission. The information displayed by the Net Display mode is described in the following paragraphs. PU.— The PU number. The first number listed is the NCS, which has a default number of 77, or the address entered in the NCS field. The rest of the PUs are listed in numerical order. SIG PWR.— The total signal strength of the 16 tones, measured in dBm. A value of -51 indicates that no signal was received. 3-13